How to use Apple Configurator

https://www.youtube.com/watch?v=EySbkN3Eh64

The standard method provided at support.apple.com/mac/restore
DFU Blaster - The device does not respond
The macvdmtool I reiceve the following response:

restoring/reviving A MacBook

Restoring or reviving a MacBook, whether it's a MacBook Air or MacBook Pro, involves a slightly different process for Apple Silicon and T2 devices.

How to SET UP Apple Silicon macbooks TO ENTER DFU MODE

If you are using a Macbook Pro or a Macbook Air, plug the device you want to restore/revive into a power source to ensure your laptop maintains power during the configuration process.
Plug the USB-C Cable into the furthest left port on the left-hand side of the device.

Please note, if the device is not plugged into the correct port your Mac will not enter DFU Mode.

3. Plug the other end of the USB-C cable into the Mac that is running Apple Configurator, you can use any port.

entering dfu mode for an Apple silicon macbook

1. Using the device you want to restore/revive, press and hold the power button for 10 seconds to ensure the device has shut down.

2. Press and let go of the power button, then immediately press and hold Control, Option, Shift (Right-hand side of the keyboard) and the power button at the same time.

3. Hold down this combination of keys for 10 seconds, then release all the keys except for the power button.

4. Release the power button after 3 seconds.

5. If successful, the device will enter DFU mode and will appear in Apple configurator.

How to SET UP T2 macbooks TO ENTER DFU MODE

1. If you are using a Macbook Pro or a Macbook Air, plug the device you want to restore/revive into a power source to ensure your laptop maintains power during the configuration process.

2. Plug the USB-C Cable into the port the furthest right on the left-hand side of the device.

Please note, if the device is not plugged into the correct port your Mac will not enter DFU Mode.

3. Plug the other end of the USB-C cable into the Mac running Apple Configurator, you can use any port.

entering dfu mode for macbook with T2 Chip

3. If successful, the device will enter DFU mode, which will present itself on the configurator app.

If you restore a T2 device, macOS or recoveryOS must be re-installed using Internet Recovery.

Restoring/Reviving A Desktop mac

Entering DFU mode on a desktop Mac is a slightyl different process

How to SET UP a mac mini to enter dfu mode

1. Unplug the device from its power source.

2. Plug the USB-C Cable into the port furthest to the left on the back of the device you are looking to restore/revive.

3. Plug the other end of the USB-C cable into any port on the Mac running Apple Configurator and ensure that it is connected to the internet.

How to SET UP a mac studio to enter dfu mode

1. Unplug the device from its power source.

2. Plug the USB-C Cable into the port furthest to the right of the back of the device.

3. Plug the other end of the USB-C cable into any port on the device running Apple Configurator.

How to SET UP an imac to enter dfu mode

1. Unplug the device from its power source.

2. Plug the USB-C Cable into the port furthest to the right of the back of the device.

3. Plug the other end of the USB-C cable into any port on the device running Apple Configurator.

entering dfu mode for ALL desktop Mac

1. Press and hold the power button.

2. While still holding the power button, plug the device you want to restore/revive back into its power source.

3. Release the power button after three seconds.

4. If successful, the device will enter DFU mode and will appear in Apple Configurator.

How to Revive or Restore in apple configurator

Once you are in DFU mode, you can revive or restore the device. To revive, select the DFU symbol displayed in Apple configurator to bring up the menu bar and select the following,

Actions > Advanced > Revive Device

The device will show a progress bar indicating the revival in progress. Once completed the device being Revived will startup.

To Restore, select the DFU symbol displayed on the Apple configurator to bring up the menu bar and select the following,

Actions > Advanced > Restore

If successful, the device will show a progress bar indicating the restore in progress. Once completed, the Restored device should boot by itself and load the device setup procedure.

Restored T2 devices will need to connect to the internet in order to download recoveryOS and reinstall macOS.